4051435068765The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.
4051435006781Diameter (mm): 20
Total length (mm): 600
Working length (mm): 530
Tool shank: SDS Top
Putting, fast replaceable SDS Top drills for pneumatic rotary hammers have a 14 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 70 mm from the total length. This is the length at which the drill is putted on the hammer.
4051435069694Diameter (mm): 80
Total length (mm): 72/570
Maximum depth (mm): 50
Threaded: M22 x 2.5
Cutting material: carbide
Impact Drilling: yes
Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Diameter (mm): 16.5
Total length (mm): 310
Working length (mm): 250
Tool shank: SDS Plus
Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Diameter (mm): 10.5
Total length (mm): 260
Working length (mm): 200
Tool shank: SDS Plus
Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
