4051435013574Dimensions (mm): 7.9 x 4.9 x 10.0
Type: CB-64
Compatible with Part Number: 191627-8
The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.
4051435009317Thread Size: M1 x 0.25
Standard: metric
Type: right Hand
Cutting material: HSS
A tap is a drill for creating an internal thread in metal, plastic or other solid materials. The tap only cuts the thread. The actual core hole must first be pre-drilled with an ordinary twist drill.
4051435055963Diameter (mm): 45
Maximum depth (mm): 29
Threaded: 1/2"-20 UNF
Cutting material: carbide
Tool shank: Hex
Drills which have a hexagonal grip are putted on a normal clamping head or on a collet drill chuck. Hexagonal form allows to keep the drill in the chuck in proper alignment, so there is a better energy transfer.
4051435123938Diameter (mm): 10.5
Total length (mm): 160
Working length (mm): 100
Tool shank: SDS Plus
Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
4051435047562The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.
Diameter (mm): 16.5
Total length (mm): 160
Working length (mm): 100
Tool shank: SDS Plus
Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Mains voltage (Volt): 220-240V 50Hz
The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.
Diameter (mm): 10.5
Total length (mm): 310
Working length (mm): 250
Tool shank: SDS Plus
Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Diameter (mm): 12.5
Total length (mm): 310
Working length (mm): 250
Tool shank: SDS Plus
Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
