Germany from 25 € free delivery, rest Europe from 50 €.
Immediate shipping
800,000+ satisfied customers in more than 60 countries
Adapter/Converter
1-13mm drill chuck with 500mm 16mm hexagonal extension
10307150Kutlu Deutschland GmbHClamping Range (mm): 1-13
Working length (mm): 500
Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10307150
39.78€
1.5-13mm key type drill chuck with 19mm spline shank adapter
10329150Kutlu Deutschland GmbHClamping Range (mm): 1.5-13
Article no:10329150
20.16€
1/4" hexagonal shank drill chuck adapter with 3/8"-24 UNF thread
10214200Kutlu Deutschland GmbHThread Size: 3/8"-24 UNF
Locking screw: M5 x 0.8
Tool shank: 1/4" hex
Drills with exagonal grip 1/4" are used most often in impact or cordless drivers. Hexagonal form allows to keep the drill in the chuck in proper alignment, so there is a better energy transfer.
Article no:10214200
6.14€
SDS-Plus drill chuck adapter with 3/8"-24 UNF thread
10163400Kutlu Deutschland GmbHThread Size: 3/8"-24 UNF
Locking screw: M5 x 0.8
Tool shank: SDS Plus
Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10163400
6.14€
-22%
1/4" hexagonal shank drill chuck adapter with 1/2"-20 UNF thread
10091200Kutlu Deutschland GmbHThread Size: 1/2"-20 UNF
Locking screw: M6 x 1
Tool shank: 1/4" hex
Drills with exagonal grip 1/4" are used most often in impact or cordless drivers. Hexagonal form allows to keep the drill in the chuck in proper alignment, so there is a better energy transfer.
Article no:10091200
6.14€ 4.79€
3-16mm key type drill chuck with 19mm spline shank adapter
10329200Kutlu Deutschland GmbHClamping Range (mm): 3-16
Article no:10329200
24.94€
SDS-Plus drill chuck adapter with 1/2"-20 UNF thread and locking screw
10091100Kutlu Deutschland GmbHThread Size: 1/2"-20 UNF
Locking screw: M6 x 1
Tool shank: SDS Plus
Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10091100
6.14€
-22%
SDS-Max drill chuck adapter with 1/2"-20 UNF thread and locking screw
10091150Kutlu Deutschland GmbHPutting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10091150
10.63€ 8.28€
100mm hexagonal shank for diamond core drill bits with 1-1/4" thread
10099800Kutlu Deutschland GmbH100mm hexagonal shank for diamond core drill bits with 1-1/4" thread
Article no:10099800
26.61€
5/4" SDS-Plus shank for diamond core drill bits with 1-1/4" thread
10099850Kutlu Deutschland GmbHPutting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10099850
26.61€
5/4" SDS-Max shank for diamond core drill bits with 1-1/4" thread
10099900Kutlu Deutschland GmbHPutting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10099900
31.29€
Thread adapter 1/2" --- 3/8" for drill chuck
10100000Kutlu Deutschland GmbHThread adapter 1/2" --- 3/8" for drill chuck
Article no:10100000
5.07€
Thread adapter 1/2" --- 3/8" for drill chuck
10100050Kutlu Deutschland GmbHThread adapter 1/2" --- 3/8" for drill chuck
Article no:10100050
5.07€
SDS-Max --- SDS-Plus drill chuck adapter
10101000Kutlu Deutschland GmbHPutting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10101000
33.14€
Spline shank --- SDS-Plus drill chuck adapter
10101100Kutlu Deutschland GmbHPutting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10101100
33.14€
-22%
Angle drilling head
10103700Kutlu Deutschland GmbHAngle drilling head
Article no:10103700
11.02€ 8.60€
-22%
SDS-Plus adapter with M14 thread
10150250Kutlu Deutschland GmbHPutting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10150250
6.14€ 4.79€
Adapter with straight shank + M14 thread
10150300Kutlu Deutschland GmbHAdapter with straight shank + M14 thread
Article no:10150300
6.14€
13mm Makita hexagonal shank --- SDS-Plus drill chuck adapter
10159000Kutlu Deutschland GmbHPutting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.
Article no:10159000
33.14€
SDS-Max --- SDS-Plus drill chuck adapter
10196150Kutlu Deutschland GmbHPutting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10196150
43.67€
1-13mm key type drill chuck with SDS-Plus adapter
10244600Kutlu Deutschland GmbHPutting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10244600
20.46€
-22%
1-13mm key type drill chuck with 1/4" hexagonal shank
10244650Kutlu Deutschland GmbHDrills with exagonal grip 1/4" are used most often in impact or cordless drivers. Hexagonal form allows to keep the drill in the chuck in proper alignment, so there is a better energy transfer.
Article no:10244650
20.46€ 15.96€
1-13mm key type drill chuck with SDS-Max adapter
10244700Kutlu Deutschland GmbHPutting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10244700
24.94€
1-16mm precision-keyless drill chuck with SDS-Plus adapter
10245950Kutlu Deutschland GmbHOuter diameter (mm): 48
Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10245950
34.99€
1-16mm precision-keyless drill chuck with 1/4" hexagonal shank
10246000Kutlu Deutschland GmbHOuter diameter (mm): 48
Drills with exagonal grip 1/4" are used most often in impact or cordless drivers. Hexagonal form allows to keep the drill in the chuck in proper alignment, so there is a better energy transfer.
Article no:10246000
34.99€
800
.pagescroll #products
.pagescroll .list-group
Monthly Specials For November
-50%
1/2"-20 UNF HSS taps 1-step finish (Right hand)
4051435010078Thread Size: 1/2"-20-20
Standard: UNF
Type: right Hand
Cutting material: HSS
A tap is a drill for creating an internal thread in metal, plastic or other solid materials. The tap only cuts the thread. The actual core hole must first be pre-drilled with an ordinary twist drill.
Article no:10051100
25.40€ 12.70€
-22%
1/4" hexagonal shank drill chuck adapter with 1/2"-20 UNF thread
4051435017442Thread Size: 1/2"-20 UNF
Locking screw: M6 x 1
Tool shank: 1/4" hex
Drills with exagonal grip 1/4" are used most often in impact or cordless drivers. Hexagonal form allows to keep the drill in the chuck in proper alignment, so there is a better energy transfer.
Article no:10091200
6.14€ 4.79€
-22%
5x sanding belts 65x410mm grit 180
4051435037334Quantity: 5
Width (mm): 65
Circumference (mm): 410
Grit: 180
Article no:10207100
6.33€ 4.94€
-50%
1x TC oil shaft seals NBR 50x90x12mm
4051435090971Quantity: 1
Outer diameter (mm): 90
Inner diameter (mm): 50
Height (mm): 12
Article no:10487300
5.39€ 2.70€
-50%
SK40 (ISO40) adapter sleeve for MT5 morse taper shank
4051435017688Tool shank: SK40
Morse taper (inside): 5
Tightening thread: M16 x 2
Article no:10092400
52.93€ 26.47€
-50%
1x TC oil shaft seals NBR 40x75x10mm
4051435089012Quantity: 1
Outer diameter (mm): 75
Inner diameter (mm): 40
Height (mm): 10
Article no:10477500
4.66€ 2.33€
-50%
1x TC oil shaft seals NBR 65x100x12mm
4051435092517Quantity: 1
Outer diameter (mm): 100
Inner diameter (mm): 65
Height (mm): 12
Article no:10495000
5.60€ 2.81€
-22%
LM122130 linear ball bearing 12x21x30mm
4051435120739Inner diameter (mm): 12
Outer diameter (mm): 21
Length (mm): 30
Article no:10537400
1.72€ 1.33€
-50%
Solid carbide burr type J shank diameter 6.35mm
4051435028134Head shape: J
Shaft diameter (mm): 6.35
Total length (mm): 51
Article no:10153600
11.02€ 5.51€
-22%
HSS metalworking twist drill bits DIN345 Ø 16.5mm MT2
4051435003643Diameter (mm): 16.5
Morse Taper: 2
Total length (mm): 223
Spiral length (mm): 125
Cutting material: HSS
Article no:10018250
6.44€ 5.02€
-50%
1x TC oil shaft seals NBR 75x90x12mm
4051435095129Quantity: 1
Outer diameter (mm): 90
Inner diameter (mm): 75
Height (mm): 12
Article no:10508100
5.22€ 2.61€
-50%
Ratched load securing straps 8m long - 2T
4051435036832Length (m): 8
Traction force (kg): 2000
Article no:10204600
10.53€ 5.27€
-50%
O-rings DIN3771 NBR - D=53mm (53.3mm) d=46mm (46.2mm) cross section=4mm (3.55mm
4051435094207Outer diameter (mm): 53.3
Inner diameter (mm): 46.20
Cross section (mm): 3.55
Quantity: 1
Article no:10503450
3.09€ 1.54€
-50%
MT4 (M16) collet chuck for collets type ER40
4051435028516Morse Taper: 4
Tightening thread: M16 x 2
Type: ER40
Article no:10155650
52.90€ 26.45€
-22%
2x carbon brushes for Hilti TE92 (74718)
4051435047395Type: TE92
Compatible with Part Number: 74718
The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.
Article no:10269650
8.77€ 6.84€
Featured Products
-25%
2-13mm CLICK-keyless drill chuck with 3/8"-24 UNF thread
Clamping Range (mm): 2-13
Threaded: 3/8"-24 UNF
Article no:10540350
17.16€ 12.86€
-50%
1x TC oil shaft seals NBR 38x80x12mm
Quantity: 1
Outer diameter (mm): 80
Inner diameter (mm): 38
Height (mm): 12
Article no:10474950
4.98€ 2.49€
-22%
Pneumatic 90° angle female elbow push in fitting (PLF) Ø 14mm with thread BSPT
Hose diameter (mm): 14
Thread Size: BSPT R3/8
Article no:10409800
9.20€ 7.17€
-50%
1x TC oil shaft seals NBR 65x75x8mm
Quantity: 1
Outer diameter (mm): 75
Inner diameter (mm): 65
Height (mm): 8
Article no:10495900
4.94€ 2.47€
Pneumatic sleeve quick connector (MPUC) Ø 16mm
Hose diameter (mm): 16
Article no:10430650
16.14€
-22%
2-Jaw puller 150mm
Total length (mm): 150
Number of arms: 2
Clamping Range (mm): 20-190
Article no:10547500
9.94€ 7.76€
-50%
1x TC oil shaft seals NBR 40x90x8mm
Quantity: 1
Outer diameter (mm): 90
Inner diameter (mm): 40
Height (mm): 8
Article no:10478050
5.15€ 2.58€
2x shaft seal rings suitable for Stihl MS270,MS270C,MS270CQS,MS280,MS280C,MS280CQS (96390031585)
The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.
Article no:10524250
7.80€
-50%
1x TC oil shaft seals NBR 27x38x10mm
Quantity: 1
Outer diameter (mm): 38
Inner diameter (mm): 27
Height (mm): 10
Article no:10461700
4.18€ 2.09€
ball bearing suitable for Stihl FS300, FS350 (*95030030210)
The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.
Article no:10520500
2.78€
New Products For November
-22%
5 pcs. metalworking HSS-TIN twist drill set Ø 7.1-7.5mm (0.1mm steps)
4051435123518Content Size (mm): 7.1, 7.2, 7.3, 7.4, 7.5
Article no:10551300
5.74€ 4.48€
-22%
5 pcs. metalworking HSS-TIN twist drill set Ø 7.6-8mm (0.1mm steps)
4051435123525Content Size (mm): 7.6, 7.7, 7.8, 7.9, 8.0
Article no:10551350
6.62€ 5.16€
-22%
5 pcs. metalworking HSS-TIN twist drill set Ø 8.1-8.5mm (0,1)
4051435123532Content Size (mm): 8.1, 8.2, 8.3, 8.4, 8.5
Article no:10551400
6.09€ 4.76€
-25%
5 pcs. metalworking HSS-TIN twist drill set Ø 8.6-9mm (0,1)
4051435123549Content Size (mm): 8.6, 8.7, 8.8, 8.9, 9.0
Article no:10551450
6.95€ 5.21€
5 pcs. metalworking HSS-TIN twist drill set Ø 9,1-9,5mm (0,1)
4051435123556Content Size (mm): 9.1, 9.2, 9.3, 9.4, 9.5
Article no:10551500
6.79€