Germany from 25 € free delivery, rest Europe from 50 €.
Immediate shipping
800,000+ satisfied customers in more than 60 countries


0.8-10mm keyless drill chuck with 1/4" hexagonal shank

 
16.10
Price incl. 19% VAT., plus shipping and handling

Qty Discounts Off Price

QuantityPrice
116.10€
2-415.89€
5-915.77€
10+15.66€
0.8-10mm keyless drill chuck with 1/4

10395000 4051435072458
  • Model: 10395000
  • Shipping Weight: 0.25lbs
  • 323 Units in Stock
Add to Cart:



0.8-10mm keyless drill chuck with 1/4\" hexagonal shank
0.8-10mm keyless drill chuck with 1/4\" hexagonal shank

Drills with exagonal grip 1/4" are used most often in impact or cordless drivers. Hexagonal form allows to keep the drill in the chuck in proper alignment, so there is a better energy transfer.







 

Customers who bought this product also purchased...

150 pcs. HSS twist drill set Ø 0.4-3.2mm

150 pcs. HSS twist drill set Ø 0.4-3.2mm

4051435034593
150 pcs. HSS twist drill set Ø 0.4-3.2mm
Article no:10193100
Reviews:
12.90
-22%
O-rings DIN3771 NBR - D=65mm (65.1mm) d=58mm (58mm) cross section=4mm (3.55mm)

O-rings DIN3771 NBR - D=65mm (65.1mm) d=58mm (58mm) cross section=4mm (3.55mm)

4051435094283
O-rings DIN3771 NBR - D=65mm (65.1mm) d=58mm (58mm) cross section=4mm (3.55mm)
Article no:10503850
Reviews:
3.34€ 2.61
HSS square tool bits for lathe 6x6x100mm

HSS square tool bits for lathe 6x6x100mm

4051435015301
HSS square tool bits for lathe 6x6x100mm
Article no:10078600
Reviews:
2.80
HSS centre drill bit DIN333A Ø 1.6mm

HSS centre drill bit DIN333A Ø 1.6mm

4051435029469
HSS centre drill bit DIN333A Ø 1.6mm
Article no:10162000
Reviews:
2.80
5m NBR sealing tape 5x15mm

5m NBR sealing tape 5x15mm

4051435064446
5m NBR sealing tape 5x15mm
Article no:10354950
Reviews:
3.87


Featured Products

-22%
Pneumatic push in T-fitting (PD) Ø 10mm with thread BSPT R1/8"

Pneumatic push in T-fitting (PD) Ø 10mm with thread BSPT R1/8"

Hose diameter (mm): 10 Thread Size: BSPT R1/8
Article no:10413000
Reviews:
3.01€ 2.36
1x TC oil shaft seals NBR 28x48x8mm

1x TC oil shaft seals NBR 28x48x8mm

Quantity: 1 Outer diameter (mm): 48 Inner diameter (mm): 28 Height (mm): 8
Article no:10463050
Reviews:
4.25
-22%
LM6090110 linear ball bearing 60x90x110mm

LM6090110 linear ball bearing 60x90x110mm

Inner diameter (mm): 60 Outer diameter (mm): 90 Length (mm): 110
Article no:10537900
Reviews:
36.39€ 28.38
16.5mm SDS-Plus Quadro X concrete/masonry/hammer drill bit 4-crossed-tips 16.5x160mm

16.5mm SDS-Plus Quadro X concrete/masonry/hammer drill bit 4-crossed-tips 16.5x160mm

Diameter (mm): 16.5 Total length (mm): 160 Working length (mm): 100 Tool shank: SDS Plus Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10553500
Reviews:
4.00
Armature for Bosch type GBH12-52DV (1607000C3Y)

Armature for Bosch type GBH12-52DV (1607000C3Y)

Mains voltage (Volt): 220-240V 50Hz The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.
Article no:10526800
Reviews:
68.00
-22%
Pneumatic sleeve quick connector (MPUC) Ø 14mm

Pneumatic sleeve quick connector (MPUC) Ø 14mm

Hose diameter (mm): 14
Article no:10430600
Reviews:
9.58€ 7.47
-22%
10.5mm SDS-Plus Quadro X concrete/masonry/hammer drill bit 4-crossed-tips 10.5x310mm

10.5mm SDS-Plus Quadro X concrete/masonry/hammer drill bit 4-crossed-tips 10.5x310mm

Diameter (mm): 10.5 Total length (mm): 310 Working length (mm): 250 Tool shank: SDS Plus Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10554000
Reviews:
5.90€ 4.60
Pneumatic silencer (SU-20) with thread BSPT R3/4"

Pneumatic silencer (SU-20) with thread BSPT R3/4"

Thread Size: BSPT R3/4
Article no:10434600
Reviews:
8.18
-22%
MT5 drill chuck arbor with JT33 taper and M20 draw bar

MT5 drill chuck arbor with JT33 taper and M20 draw bar

Morse Taper: 5 Cone: JT33 Tightening thread: M20 x 2.5
Article no:10387100
Reviews:
19.00€ 14.82
19mm cam rollers (KR19PP)

19mm cam rollers (KR19PP)

D: 19mm d : 8mm B: 32mm C: 11mm B1: 20mm C1: 0.6mm d1 : 15mm G: M8 G1: 10mm M: 4mm
Article no:10545100
Reviews:
18.24


The Best Ways to Pay Online,

Prices and shipping


Copyright © 2005-2022 Kutlu Deutschland GmbH