Germany from 25 € free delivery, rest Europe from 50 €.

Immediate shipping

800,000+ satisfied customers in more than 60 countries

» » » »

SDS max

SDS max CATEGORY_TAGLINE

-50%

SDS-Max point chisel 250mm for Bosch/Makita/Hilti/Hitachi/Dewalt

10060350Kutlu Deutschland GmbHTotal length (mm): 250 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060350

Reviews:

13.30€ 6.65€

-22%

SDS-Max point chisel 400mm for Bosch/Makita/Hilti/Hitachi/Dewalt

10060400Kutlu Deutschland GmbHTotal length (mm): 400 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060400

Reviews:

15.20€ 11.85€

SDS-Max point chisel 600mm for Bosch/Makita/Hilti/Hitachi/Dewalt

10060450Kutlu Deutschland GmbHTotal length (mm): 600 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060450

Reviews:

19.00€

SDS-Max flat chisel 25x250mm for Bosch/Makita/Hilti/Hitachi

10060500Kutlu Deutschland GmbHWidth (mm): 25 Total length (mm): 250 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060500

Reviews:

14.40€

SDS-Max flat chisel 25x400mm for Bosch/Makita/Hilti/Hitachi

10060550Kutlu Deutschland GmbHWidth (mm): 25 Total length (mm): 400 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060550

Reviews:

16.10€

-22%

SDS-Max flat chisel 25x600mm for Bosch/Makita/Hilti/Hitachi

10060600Kutlu Deutschland GmbHWidth (mm): 25 Total length (mm): 600 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060600

Reviews:

19.90€ 15.52€

SDS-Max wide flat chisel 50x250mm for Bosch/Makita/Hilti/Hitachi

10060650Kutlu Deutschland GmbHWidth (mm): 50 Total length (mm): 250 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060650

Reviews:

15.50€

SDS-Max wide flat chisel 50x400mm for Bosch/Makita/Hilti/Hitachi

10060700Kutlu Deutschland GmbHWidth (mm): 50 Total length (mm): 400 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060700

Reviews:

17.60€

-25%

SDS-Max wide flat chisel 50x600mm for Bosch/Makita/Hilti/Hitachi

10060750Kutlu Deutschland GmbHWidth (mm): 50 Total length (mm): 600 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060750

Reviews:

21.20€ 15.90€

SDS-Max wide flat chisel 75x250mm for Bosch/Makita/Hilti/Hitachi

10060800Kutlu Deutschland GmbHWidth (mm): 75 Total length (mm): 250 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060800

Reviews:

17.70€

-25%

SDS-Max wide flat chisel 75x400mm for Bosch/Makita/Hilti/Hitachi

10060850Kutlu Deutschland GmbHWidth (mm): 75 Total length (mm): 400 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060850

Reviews:

19.60€ 14.70€

SDS-Max wide flat chisel 75x600mm for Bosch/Makita/Hilti/Hitachi

10060900Kutlu Deutschland GmbHWidth (mm): 75 Total length (mm): 600 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060900

Reviews:

23.30€

-22%

SDS-Max flat chisel 25x1000mm for Bosch/Makita/Hilti/Hitachi

10060950Kutlu Deutschland GmbHWidth (mm): 25 Total length (mm): 1000 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10060950

Reviews:

22.90€ 17.86€

SDS-Max tile chisel 75x400mm for Bosch/Makita/Hilti

10061000Kutlu Deutschland GmbHPutting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10061000

Reviews:

20.71€

SDS-Max hollow hand chisel 250mm

10061050Kutlu Deutschland GmbHWidth (mm): 26 Total length (mm): 250 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10061050

Reviews:

17.70€

-22%

SDS-Max hollow hand chisel 400mm

10061100Kutlu Deutschland GmbHWidth (mm): 26 Total length (mm): 400 Tool shank: SDS Max Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10061100

Reviews:

19.60€ 15.29€

SDS-Max wings hand chisel 250mm

10061150Kutlu Deutschland GmbHPutting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10061150

Reviews:

20.90€

SDS-Max shovel hand chisel 400mm

10107200Kutlu Deutschland GmbHPutting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.

Article no:10107200

Reviews:

47.80€

4x SDS-Max chisels for Hilti TE-Y TE500/50/504/505/54/55/60/72/74/75/76

10372850Kutlu Deutschland GmbHTotal length (mm): 250 Tool shank: SDS Max # Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer. The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.

Article no:10372850

Reviews:

30.00€

4x SDS-Max chisels for Hilti TE-Y TE500/50/504/505/54/55/60/72/74/75/76

10372900Kutlu Deutschland GmbHTotal length (mm): 250 Tool shank: SDS Max # Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer. The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.

Article no:10372900

Reviews:

28.00€

-22%

4x SDS-Max chisels for Hilti TE-Y TE500/50/504/505/54/55/60/72/74/75/76

10372950Kutlu Deutschland GmbHTotal length (mm): 400 Tool shank: SDS Max # Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer. The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.

Article no:10372950

Reviews:

38.00€ 29.64€

4x SDS-Max chisels for Hilti TE-Y TE500/50/504/505/54/55/60/72/74/75/76

10373000Kutlu Deutschland GmbHTotal length (mm): 400 Tool shank: SDS Max # Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer. The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.

Article no:10373000

Reviews:

34.00€

4x SDS-Max chisels for Hilti TE-Y TE500/50/504/505/54/55/60/72/74/75/76

10373050Kutlu Deutschland GmbHTotal length (mm): 600 Tool shank: SDS Max # Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer. The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.

Article no:10373050

Reviews:

48.00€

4x SDS-Max chisels for Hilti TE-Y TE500/50/504/505/54/55/60/72/74/75/76

10373100Kutlu Deutschland GmbHTotal length (mm): 600 Tool shank: SDS Max # Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer. The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.

Article no:10373100

Reviews:

42.00€