10272050Kutlu Deutschland GmbHMains voltage (Volt): 100-120V 60Hz
Motor power (watts): 260
Idle speed (r/min.): 4500
Weight (grams): 1480
Maximum cutting thickness (mm): 1.6
10272100Kutlu Deutschland GmbHMains voltage (Volt): 100-120V 60Hz
Motor power (watts): 550
Idle speed (r/min.): 1600
Weight (grams): 2260
Maximum cutting thickness (mm): 2.5
10272150Kutlu Deutschland GmbHMains voltage (Volt): 100-120V 60Hz
Motor power (watts): 660
Idle speed (r/min.): 1600
Weight (grams): 3520
Maximum cutting thickness (mm): 3.2
10109250Kutlu Deutschland GmbHMains voltage (Volt): 220-240V 50Hz
Motor power (watts): 260
Idle speed (r/min.): 4500
Weight (grams): 1480
Maximum cutting thickness (mm): 1.6
10113950Kutlu Deutschland GmbHMains voltage (Volt): 220-240V 50Hz
Motor power (watts): 550
Idle speed (r/min.): 1600
Weight (grams): 2260
Maximum cutting thickness (mm): 2.5
10109300Kutlu Deutschland GmbHMains voltage (Volt): 220-240V 50Hz
Motor power (watts): 660
Idle speed (r/min.): 1600
Weight (grams): 3520
Maximum cutting thickness (mm): 3.2
4051435016872Size (mm): 8
Total length (mm): 35
Tool shank: 1/4" hex
Drills with exagonal grip 1/4" are used most often in impact or cordless drivers. Hexagonal form allows to keep the drill in the chuck in proper alignment, so there is a better energy transfer.
4051435068864The naming of brands for the aftermarket business is based on § 23 MarkenG (Trademark law) and not call the manufacturer of the goods offered.
4051435098441Diameter (mm): 6
Total length (mm): 160
Working length (mm): 100
Tool shank: SDS Plus
Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
4051435009768Thread Size: 9/16"-12
Standard: UNC
Type: left-hand thread
Cutting material: HSS
A tap is a drill for creating an internal thread in metal, plastic or other solid materials. The tap only cuts the thread. The actual core hole must first be pre-drilled with an ordinary twist drill.
4051435123747Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.
4051435123754Putting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.