Dewalt : Drill Bits and other cutting tools online store, Kutlu Deutschland GmbH   

Germany from 25 € free delivery, rest Europe from 50 €.
Immediate shipping
800,000+ satisfied customers in more than 60 countries


Dewalt

There are no products to list in this category.
800
.pagescroll #products
.pagescroll .list-group


Monthly Specials For April

-22%
Abrasive grinding flap wheel 100mmx16mm grit 60

Abrasive grinding flap wheel 100mmx16mm grit 60

10213900Kutlu Deutschland GmbHAbrasive grinding flap wheel 100mmx16mm grit 60
Article no:10213900
5
Reviews:
2.30€ 1.80
-22%
SDS-Plus shank 200mm with M16 thread and taper shank pilot drill bit

SDS-Plus shank 200mm with M16 thread and taper shank pilot drill bit

10363600Kutlu Deutschland GmbHPutting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10363600
5
Reviews:
12.80€ 9.98
-22%
Reversible airless paint sprayer tip for Wagner (511)

Reversible airless paint sprayer tip for Wagner (511)

10545400Kutlu Deutschland GmbHType: 511 Outer diameter (mm): 11
Article no:10545400
5
Reviews:
19.00€ 14.82
-22%
21mm kango hexagonal shank point chisel 400mm

21mm kango hexagonal shank point chisel 400mm

10158250Kutlu Deutschland GmbH21mm kango hexagonal shank point chisel 400mm
Article no:10158250
5
Reviews:
15.20€ 11.85
-22%
18mm SDS-Plus Quadro X concrete/masonry/hammer drill bit 4-crossed-tips 18x460mm

18mm SDS-Plus Quadro X concrete/masonry/hammer drill bit 4-crossed-tips 18x460mm

10031750Kutlu Deutschland GmbHDiameter (mm): 18 Total length (mm): 460 Working length (mm): 400 Tool shank: SDS Plus Putting, fast replaceable SDS Plus drills for pneumatic rotary hammers have a 10 mm diameter of a shank and have 4 oval-shaped grooves, from which on one side there are 2 closed and 2 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 60 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10031750
5
Reviews:
16.20€ 12.64


Featured Products

5/4" SDS-Max shank for diamond core drill bits with 1-1/4" thread (rusty)

5/4" SDS-Max shank for diamond core drill bits with 1-1/4" thread (rusty)

10548150Kutlu Deutschland GmbHPutting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10548150
5
Reviews:
10.00
-50%
1x TC oil shaft seals NBR 45x85x12mm

1x TC oil shaft seals NBR 45x85x12mm

10483300Kutlu Deutschland GmbHQuantity: 1 Outer diameter (mm): 85 Inner diameter (mm): 45 Height (mm): 12
Article no:10483300
5
Reviews:
5.36€ 2.68
330mm (13 ") PU solid rubber spare wheel (4.00-6) Spare tire for wheelbarrows 75x25mm

330mm (13 ") PU solid rubber spare wheel (4.00-6) Spare tire for wheelbarrows 75x25mm

10546850Kutlu Deutschland GmbHWheel diameter (mm): 330 Section width (mm): 75 Hub Length (mm): 75 Hub diameter (mm): 25
Article no:10546850
5
Reviews:
19.88
-22%
2-jaw puller 250mm

2-jaw puller 250mm

10547600Kutlu Deutschland GmbHTotal length (mm): 250 Number of arms: 2 Clamping Range (mm): 30-310
Article no:10547600
5
Reviews:
19.10€ 14.90
3-16mm key type drill chuck with B18 taper

3-16mm key type drill chuck with B18 taper

10547200Kutlu Deutschland GmbHClamping Range (mm): 3-16 Cone: B18
Article no:10547200
5
Reviews:
14.70
2-Jaw puller 75mm

2-Jaw puller 75mm

10547400Kutlu Deutschland GmbHTotal length (mm): 75 Number of arms: 2 Clamping Range (mm): 20-100
Article no:10547400
5
Reviews:
7.40
-25%
Pneumatic female straight connector push in fitting (PCF) Ø 10mm with thread BSP

Pneumatic female straight connector push in fitting (PCF) Ø 10mm with thread BSP

10410600Kutlu Deutschland GmbHHose diameter (mm): 10 Thread Size: BSPT R1/8
Article no:10410600
5
Reviews:
2.09€ 1.57
Pneumatic 90° arc-push (MPL) Ø 12mm with thread BSPT R3/8"

Pneumatic 90° arc-push (MPL) Ø 12mm with thread BSPT R3/8"

10428350Kutlu Deutschland GmbHHose diameter (mm): 12 Thread Size: BSPT R3/8
Article no:10428350
5
Reviews:
8.94
-22%
Pneumatic 90° male banjo push in fitting (PH) Ø 6mm with thread BSPT R1/2"

Pneumatic 90° male banjo push in fitting (PH) Ø 6mm with thread BSPT R1/2"

10415050Kutlu Deutschland GmbHHose diameter (mm): 6 Thread Size: BSPT R1/2
Article no:10415050
5
Reviews:
5.88€ 4.58
125mm abrasive grinding flap disc 125x22.2mm grit 100

125mm abrasive grinding flap disc 125x22.2mm grit 100

10547250Kutlu Deutschland GmbHOuter diameter (mm): 125 Bore (mm): 22.2 Grit: 100 Maximum speed (r/min.): 12.200
Article no:10547250
5
Reviews:
2.98


New Products For April

5/4" SDS-Max shank for diamond core drill bits with 1-1/4" thread (rusty)

5/4" SDS-Max shank for diamond core drill bits with 1-1/4" thread (rusty)

10548150Kutlu Deutschland GmbHPutting, fast replaceable SDS Max drills for pneumatic rotary hammers have a 18 mm diameter of a shank and have 5 oval-shaped grooves, from which on one side there are 2 closed and 3 open grooves. In order to calculate from the total length of a drill its pararell length, one has to substract 130 mm from the total length. This is the length at which the drill is putted on the hammer.
Article no:10548150
5
Reviews:
10.00


The Best Ways to Pay Online,


Copyright © 2005-2020 Kutlu Deutschland GmbH